Robinson Construction

14 job(s) at Robinson Construction

Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include industrial manufacturing; food grade processing plants, chemical and processing; power and renewable energy; and mining industries, as well as federal, state, and municipal agencies. Robinson Construction is seeking a Pipe Layer / Laborer.  This position is responsible for assembling, connecting, and constructing pipe systems waste water drains and water mains. Ensures ground is prepped and trenches dug out for pipes. Aligns pipes and seals joints together with cement or glue. ESSENTIAL RESPONSIBILITIES: Configures pipe routes. Aligns pipe in pipeline sections. Digs trenches with tools. Places pipe in trenches. Ensure pipes are fitted and aligned using pipe lasers and transits. Seals piping joints. Covers pipes with appropriate bedding materials. May grade and level trenches using tamping machines and hand tools. Assists other craft workers as needed or assigned. Maintains a clean and safe excavated work area. Performs duties of a laborer or other positions as needed. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Two or more years of pipe laying or laborer related experience for industrial construction. Previous experience with ductile iron pipe, PVC and HDPE force mains, and setting a pre-cast wet well preferred. Current OSHA 10 Certification preferred. TWIC card preferred. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of storm, storm structures, sewer, water and mains. Skill in the standard use of tools and equipment of the profession including transit or pipe lasers. Ability to read and understand grade stakes. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to comprehend and trouble-shoot problems that may arise. PHYSICAL REQUIREMENTS: Performs strenuous physical labor under adverse field conditions. Must have excellent stamina. Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time.   WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity or cold and wet conditions. May be exposed to hazardous chemicals or waste.   OTHER: Travel will be required. Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
Apply to the website below to be considered for this position. https://jobs.ourcareerpages.com/job/541634?source=ccp&key=t0cZSgf7yBF0o0SghFm7DUHKHESVSDu0eGTBAT0u9Ng%3d   Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Building Carpenters! ESSENTIAL RESPONSIBILITIES: Reads blueprints, drawings and sketches to fully grasp requirements. Coordinates with job site Superintendent/Foreman to configure construction lay out. Assembles and secures forms, wood structures, sheet metal, and other various materials. Installs form work, place steel reinforcement, install concrete, and finish as needed for concrete construction. Takes measurements and calculate the size and amount of material needed. Cuts, shapes and smooths lumber and other material (e.g. fiberglass) according to needed measurements. Builds window frames, doors, staircases and frame buildings by using raw materials or pre-constructed items. Lay out floorings, roofing or drywalls ensuring they are leveled and compatible. Assembles furniture, cabinets, shelves and other items and install them where designated. Inspects places and conduct repairs or maintenance as needed. Builds scaffolding and other construction structures. Cuts or bores holes in structures, such as bulkheads, decks, walls, or mains, using hand or power tools. Assists other craft workers as needed or assigned. Inspects work sites for obstructions or holes that could cause structural weakness. Checks work and repairs or corrects any faults. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. OTHER RESPONSIBILITIES: May train or supervise others in job duties. May perform a variety of duties including those of other positions. Industrial machine licenses (such as a forklift license) preferred. Current OSHA 10 or MSHA Certification preferred. TWIC card preferred. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Successful completion of a carpentry apprenticeship program preferred. Three or more years proven construction carpentry experience required. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of carpentry techniques and methods of installation and construction. Knowledge of basic mathematics and its applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Skill in the standard use of tools and equipment of the profession. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to visualize a layout by looking at plans and prints. PHYSICAL REQUIREMENTS: Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt. OTHER IMPORTANT INFORMATION: Travel will be required.  Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring the following hand tools to each job site: Tool Belt, Hammer, Tape Measure (30-35"), Chalk Line, Carpenter’s Pencil, Utility Knife, Tin Snips, Nail Puller, Speed Square, Framing Square, Levels/Plumb Bob and Wood Chisel.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
M-F 50 hours a week To be considered for this position, please apply by clicking the link below. https://www.robinsonconstruction.com/join-our-team/ Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Concrete Carpenters! ESSENTIAL RESPONSIBILITIES: Reads blueprints, drawings and sketches to fully grasp requirements. Coordinates with job site Superintendent/Foreman to configure construction lay out. Installation of forms for placing concrete and grout. Assists with the proper installation of reinforcing, anchors and imbeds. Is familiar with all safe work practices for hand tools and power tools if trained. Knowledgeable of elevations and has ability to help shoot grades. Uses Levels: site, laser, transit etc. Accurately measures, cuts and installs materials. Assists with concrete placement on footings, walls, flatwork and grade work. Assists other craft workers as needed or assigned. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. OTHER RESPONSIBILITIES: May train or supervise others in job duties. May perform a variety of duties including those of other positions. Industrial machine licenses (such as a forklift license) preferred. Current OSHA 10 or MSHA Certification preferred. TWIC card preferred. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Successful completion of a carpentry apprenticeship program preferred. Three or more years proven construction carpentry experience required. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of carpentry techniques and methods of installation and construction. Knowledge of basic mathematics and its applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Skill in the standard use of tools and equipment of the profession. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to visualize a layout by looking at plans and prints. PHYSICAL REQUIREMENTS: Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt. OTHER IMPORTANT INFORMATION: Travel will be required.  Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring the following hand tools to each job site: Tool Belt, Hammer, Tape Measure (30-35"), Chalk Line, Carpenter’s Pencil, Utility Knife, Tin Snips, Nail Puller, Speed Square, Framing Square, Levels/Plumb Bob and Wood Chisel.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Millwright Foremen! ESSENTIAL RESPONSIBILITIES: Directs and supervises the work of a crew of one or more trades. Reads blueprints and schematic drawings to determine work procedures. Dismantles machinery or equipment, using hammers, wrenches, crowbars, and other hand tools. Moves machinery and equipment, using hoists, dollies, rollers, and trucks. Assembles and installs equipment, such as shafting, conveyors, and tram rails, using hand tools and power tools. Constructs foundation for machines, using hand tools and building materials, such as wood cement, and steel. Aligns and positions machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, and plumb bobs. Tests machines and equipment and makes necessary adjustments. Assembles machinery and bolts, welds, rivets, or otherwise fastens them to foundation or other structures, using hand tools and power tools. Repairs and lubricates machinery and equipment. Selects cables, ropes, chains, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. Attaches load with grappling devices, such as loops, wires, ropes, and chains, to crane hook. Sets up, braces, and rigs hoisting equipment, using hand tools and power wrenches. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. Directs and supervises the work of a crew of one or more trades. Inspects work for compliance with company quality standards. Requires poor work to be corrected immediately to minimize issues. Performs work of a Carpenter in addition to Foreman duties. OTHER RESPONSIBILITIES: May take on responsibilities of the Superintendent when absent or unavailable May perform welding tasks. May train others in Millwright job duties. May perform a variety of duties including those of other positions. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Three or more years of Millwright Foreman experience. Industrial machine experience (such as a forklift) preferred. Current OSHA 10 or MSHA Certification preferred. TWIC card preferred. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and construction industrial equipment. Skill in the standard use of tools and equipment of the profession. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to visualize a layout by looking at plans and prints. Ability to comprehend and trouble-shoot mechanical systems. PHYSICAL REQUIREMENTS: Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity or cold and wet conditions. May be exposed to hazardous chemicals. OTHER: Travel will be required. Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring hand tools to each job site such as: Squares, Levels, Hammers, Pry Bar, Plumb Bob, Wrenches, Allen Keys, Socket Wrenches, Pliers, Files, Trowels, Snips, Chisels, Pipe Wrenches, Clams, Punches and Reamers.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Millwrights! ESSENTIAL RESPONSIBILITIES: Reads blueprints and schematic drawings to determine work procedures. Dismantles machinery or equipment, using hammers, wrenches, crowbars, and other hand tools. Moves machinery and equipment, using hoists, dollies, rollers, and trucks. Assembles and installs equipment, such as shafting, conveyors, and tram rails, using hand tools and power tools. Constructs foundation for machines, using hand tools and building materials, such as wood cement, and steel. Aligns and positions machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, and plumb bobs. Tests machines and equipment and makes necessary adjustments. Assembles machinery and bolts, welds, rivets, or otherwise fastens them to foundation or other structures, using hand tools and power tools. May operate engine lathe or milling machine to grind, file, and turn machine parts to dimensional specifications. Repairs and lubricates machinery and equipment. Selects cables, ropes, chains, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved. Attaches load with grappling devices, such as loops, wires, ropes, and chains, to crane hook. Sets up, braces, and rigs hoisting equipment, using hand tools and power wrenches. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. OTHER RESPONSIBILITIES: May perform tack welding. May train others in Millwright job duties. May perform a variety of duties including those of other positions. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Three or more years of Journeyman Millwright experience. Industrial machine licenses (such as a forklift license) preferred. Current OSHA 10 or MSHA Certification preferred. TWIC card preferred. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and construction industrial equipment. Skill in the standard use of tools and equipment of the profession. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to visualize a layout by looking at plans and prints. Ability to comprehend and trouble-shoot mechanical systems. PHYSICAL REQUIREMENTS: Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity or cold and wet conditions. May be exposed to hazardous chemicals. OTHER: Travel will be required. Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring hand tools to each job site such as: Squares, Levels, Hammers, Pry Bar, Plumb Bob, Wrenches, Allen Keys, Socket Wrenches, Pliers, Files, Trowels, Snips, Chisels, Pipe Wrenches, Clams, Punches and Reamers.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
M-S 60 hours NIghts https://www.robinsonconstruction.com/join-our-team/   to apply. Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Pipefitters! ESSENTIAL RESPONSIBILITIES: Coordinates with job site Superintendent to configure pipe system layout. Cuts, threads, or hammers pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders. Lays out full scale drawings of pipe systems, supports, or related equipment, according to blueprints. Assembles or secures pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints. Measures and marks pipes for cutting or threading. Inspects, examines, or tests installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods. Plans pipe system layout, installation, or repair, according to specifications. Attaches pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment. Modifies, cleans, or maintains pipe systems, units, fittings, or related machines or equipment, using hand or power tools Selects pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications. Cuts or bores holes in structures, such as bulkheads, decks, walls, or mains, prior to pipe installation, using hand or power tools. Installs automatic controls to regulate pipe systems. Shuts off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches. Removes and replaces worn components. Inspects work sites for obstructions or holes that could cause structural weakness. Installs fixtures, appliances, or equipment designed to reduce water or energy consumption. Installs pipe systems to support alternative energy-fueled systems, such as geothermal heating and cooling systems. Checks work and repairs or corrects any faults. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. OTHER RESPONSIBILITIES: May order pipes and other materials. May   train others in Pipefitter job duties. May perform a variety of duties including those of other positions. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Four or more years of Journeyman Pipefitting experience. Industrial machine licenses (such as a forklift license) preferred. Current OSHA 10 or MSHA Certification preferred. TWIC card preferred KNOWLEDGE / SKILLS / ABILITIES: Knowledge to maintain and operate production piping systems and equipment to include but not limited to pressure regulators, system control valves, pneumatic systems, temperature control units, and hydraulic systems. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge   of arithmetic, algebra, geometry, calculus, statistics, and their applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and construction industrial equipment. Skill in the standard use of tools and equipment of the profession. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to visualize a layout by looking at plans and prints. Ability to comprehend and trouble-shoot mechanical systems. PHYSICAL REQUIREMENTS: Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity or cold and wet conditions. May be exposed to hazardous chemicals or waste. OTHER: Travel will be required. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring hand tools to each job site such as: Levels, Clamps, Wrenches, Hammers, Pliers, Sockets, Squares, Measuring Tapes, Gauges, FLUPS, Protractors, Spacing Wedges, and Calculator.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
Skilled Crafts
To be considered, please apply at: https://jobs.ourcareerpages.com/job/542531?source=ccp&key=VrD1I7nJnnK1zFQb2rrtpCvc7eDSIcYf4udmdzAe%2fnY%3d Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for an Excavator!   ESSENTIAL RESPONSIBILITIES: Operates equipment such as excavators, back-hoes, front end loaders, dozers and other earth moving equipment in a safe and efficient manner. Determines load weights and check them against lifting capacities to prevent overload. Receive construction materials, equipment, and deliver them to work sites. Identify faults in equipment and take measures to fix them. Use earth moving equipment to level soil, move rock and debris, dig below surface to grades of 10 feet below surface, cut slopes, and store spoils with regulations and specifications. Demonstrate an understanding of grades and slopes to interpret plans and drawings. Have a working knowledge of trenching techniques, installation of safety devices like trench boxes and trench plates, spoil removal and storage, loading techniques, and lifting techniques for equipment and materials. Awareness of underground utilities as well as overhead hazards such as electrical wires, enclosures, and personnel. Carryout out minimal repairs on machine when necessary. Adhere to safety regulations and report hazards to relevant authorities. Adhere to company work policies and conditions. Will be responsible for cleanliness of machine, fueling, lubrication, servicing, and maintenance of the machine. Pack dirt and other waste products from work environment to dumping area. Document information of equipment purchase, repairs and maintenance for record keeping. Inspect working environment even before work begins to ensure safety to all Establish good working relationship on site. Manipulate or depress controls to regulate speed and direction of equipment and movements according to written, verbal, or signal instructions. Works within precise limits and standards of accuracy. Inspects equipment on a daily basis to ensure safe operation before use. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures.   OTHER RESPONSIBILITIES: May perform a variety of duties including those of other positions.   EDUCATION / EXPERIENCE:                                                                                        Must be at least 18 years of age. High school diploma or GED preferred. Three or more years of operating experience. Current valid driver’s license required. Current OSHA 10 or MSHA Certification preferred. TWIC card preferred. DOT physical may be required.   KNOWLEDGE / SKILLS / ABILITIES: Knowledge of heavy equipment operation techniques and hand signals. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and construction industrial equipment. Skill in the standard use of tools and equipment of the profession. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to visualize a layout by looking at plans and prints. Ability to comprehend and trouble-shoot mechanical systems.   PHYSICAL REQUIREMENTS: Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. Forceful movements of the shoulder. Repetitive movements as well as static and awkward postures of the neck, shoulder, wrist and low back. Vibration of the lower back.   WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt.   OTHER: Travel will be required. Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring the following hand tools to each job site: 2 lb Hammer, 16 oz Ball Peen Hammer, 12” Crescent Wrench, 3/8” Socket Set, Screwdrivers, and Tool Box. Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.  
To be considered for this position, please apply by clicking the link below. https://www.robinsonconstruction.com/join-our-team/ Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Concrete Carpenters! ESSENTIAL RESPONSIBILITIES: Reads blueprints, drawings and sketches to fully grasp requirements. Coordinates with job site Superintendent/Foreman to configure construction lay out. Installation of forms for placing concrete and grout. Assists with the proper installation of reinforcing, anchors and imbeds. Is familiar with all safe work practices for hand tools and power tools if trained. Knowledgeable of elevations and has ability to help shoot grades. Uses Levels: site, laser, transit etc. Accurately measures, cuts and installs materials. Assists with concrete placement on footings, walls, flatwork and grade work. Assists other craft workers as needed or assigned. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. OTHER RESPONSIBILITIES: May train or supervise others in job duties. May perform a variety of duties including those of other positions. Industrial machine licenses (such as a forklift license) preferred. Current OSHA 10 or MSHA Certification preferred. TWIC card preferred. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Successful completion of a carpentry apprenticeship program preferred. Three or more years proven construction carpentry experience required. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of carpentry techniques and methods of installation and construction. Knowledge of basic mathematics and its applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Skill in the standard use of tools and equipment of the profession. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to visualize a layout by looking at plans and prints. PHYSICAL REQUIREMENTS: Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt. OTHER IMPORTANT INFORMATION: Travel will be required.  Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring the following hand tools to each job site: Tool Belt, Hammer, Tape Measure (30-35"), Chalk Line, Carpenter’s Pencil, Utility Knife, Tin Snips, Nail Puller, Speed Square, Framing Square, Levels/Plumb Bob and Wood Chisel.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
To be considered for this position, please apply by clicking the link below. https://www.robinsonconstruction.com/join-our-team/   Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Apprentices!  No experience necessary - this is the perfect opportunity to learn the construction trades! ESSENTIAL RESPONSIBILITIES: Assists all trades in construction activates by utilizing critical thinking skills to accomplish tasks at hand. Erects and dismantles scaffolding. Demolishes buildings and dismantle forms, along with setting up pumps and hoses. Removes projections from concrete using a variety of mechanized and hand tools and equipment. Signals operators of construction equipment (such as cranes and diggers) to facilitate alignment, movement and adjustment of machinery. Digs trenches using spades and other equipment by ensuring that they conform to length and width specifications. Levels earth to fine grade specifications and ensure that extra soil / earth is stored or piled in designated areas. Mixes, grades, and pours concrete in appropriate quantities into existing frameworks by following provided instructions. Clears work sites by removing debris and hazardous materials to make them ready for construction work. Installs and removes barricades to provide assistance in ensuring worksite safety. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. OTHER RESPONSIBILITIES: May perform a variety of duties including those of other positions. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Previous experience in a construction environment preferred. Current OSHA or MSHA certification preferred. TWIC card preferred. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Skill in the standard use of tools. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. PHYSICAL REQUIREMENTS: Performs strenuous physical labor under adverse field conditions. Must have excellent stamina. Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity or cold and wet conditions. May be exposed to hazardous chemicals or waste. OTHER: Travel will be required.  Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring the following hand tools to each job site: Locking pliers (vice grip) 10", adjustable wrench (crescent wrench) 12", 25' Tape Measure, Lineman Plires, Retractable Utility Knife, 20 oz Carpenter Hammer, Screwdrivers (1 phillips and 1 straight)  medium size, Leather Tool Belt, and Leather Work Gloves.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
Skilled Crafts
To be considered, please apply to the following link: https://jobs.ourcareerpages.com/job/540714?source=ccp&key=dJhGJHcGkG9ZfjTwE86LDLtY1DkZyOU2Lbqsq%2fO4fR0%3d Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Combo Welders! ESSENTIAL RESPONSIBILITIES: Reads and interprets project plans, blueprints and other written instructions and diagrams to perform task at hand. Performs Shielded Metal Arc Welding (STICK/ARC) and Gas Tungsten Arc Gas Welding (TIG) or Flux Cored Arc Welding (FLUX) based on project needs. Field install welds, including duct work, light fixtures, vents, fans, metal sheeting and other parts. Selects proper fillers for jobs based on previous experience or project instructions. Coordinates with field labor crew for efficient installations. Conserves resources whenever possible to ensure budgetary integrity and client satisfaction. De-burs and grinds metal as necessary to achieve proper surface texture. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. OTHER RESPONSIBILITIES: May train or supervise others in job duties. May perform a variety of duties including those of other positions. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Three or more years of Journeyman Welding experience. Industrial machine licenses (such as a forklift license) preferred. Current OSHA 10 or MSHA Certification preferred. TWIC card preferred. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and construction industrial equipment. Skill in the standard use of tools and equipment of the profession. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to visualize a layout by looking at plans and prints. Ability to comprehend and trouble-shoot mechanical systems. PHYSICAL REQUIREMENTS: Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. See and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity or cold and wet conditions. May be exposed to hazardous chemicals or waste. OTHER: Travel will be required.  Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring hand tools to each job site such as: Hammers, Chipping Tools, Grinders, Welding Hood, Welding Gloves, Stingers, Clamps, Pliers and Brushes.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
Skilled Crafts
To be considered, please apply to the following link: https://jobs.ourcareerpages.com/job/540713?source=ccp&key=057frTF7Lw5G9TPWpg64DFCNuTyi%2bKKKux3dfh%2bhtKM%3d Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Ironworkers! ESSENTIAL RESPONSIBILITIES: Reads specifications or blueprints to determine the locations, quantities, or sizes of material required. Fabricates metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors. Unloads and positions prefabricated steel units for hoisting as needed. Hoists steel beams, girders, or columns into place, using cranes or signaling hoisting equipment operators to lift and position structural steel members. Verifies vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels. Cuts, bends, or welds steel pieces, using metal shears, torches, or welding equipment. Forces structural steel members into final positions, using turnbuckles, crowbars, jacks, or hand tools. Pulls, pushes, or pries structural steel members into approximate positions for bolting into place. Bolts aligned structural-steel members in position for permanent riveting, bolting, or welding into place. Assembles hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials. Dismantles structures or equipment. Assists other craft workers as needed or assigned. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. OTHER RESPONSIBILITIES: May train or supervise others in job duties. May perform a variety of duties including those of other positions. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Successful completion of an Ironworker apprenticeship preferred. Three or more years of Journeyman level iron working experience required. Industrial machine licenses (such as a forklift license) preferred. Current OSHA 10 or MSHA Certification preferred. TWIC card preferred. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and construction industrial equipment. Skill in the standard use of tools and equipment of the profession. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to visualize a layout by looking at plans and prints. Ability to comprehend and trouble-shoot mechanical systems. PHYSICAL REQUIREMENTS: Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt. OTHER: Travel will be required. Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring hand tools to each job site such as: Spud wrenches, Hammers, Squares, Reamers, Bolt Bags, Connecting Bars, Wrenches, Measuring Devices, Clamps, Pry Bars, Sockets, Wedges, Tool Holders, Bull Pins, Pliers, Levels and Tie Wire Reels.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
To be considered, please apply to the link below: https://jobs.ourcareerpages.com/job/539248?source=ccp&key=pCUH6mC4Ja%2fdZHj51Q03yPwH0xREagLvGmCTQuWMujU%3d Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include industrial manufacturing; food grade processing plants, chemical and processing; power and renewable energy; and mining industries, as well as federal, state, and municipal agencies. Robinson Construction is growing and we are looking for a Safety Representative to join our team! The purpose of the Safety Representative is to provide overall assistance to project supervision and employees with a goal to continually improve the safety performance of the company. Primary Duties: Responsible for the safety oversight of the project site. Works closely with Project Managers, Superintendents, and subcontractors to ensure implementation of Robinson Construction safety policies. Monitors, educates and trains employees on health and safety related issues. Controls hazardous working conditions and unsafe activities through safety management and collaboration with other operations supervisory personnel. Ensures subcontractor documentation is complete and accurate. Ensures required equipment training is conducted and documented. Clarifies safety rules and provide technical expertise and provides solutions to safety challenges onsite. Communicates and documents safety expectations to safely produce quality work during safety orientations for the scope of work. Attends an actively engages in all site and corporate meetings to promote safety. Leads and collaborates with team in investigating all safety incidents to determine cause, implements corrective actions, and reports incidents, as required. May perform other duties as required or assigned for the success of the project. Education/Experience: Minimum five or more years experience as a Safety Manager or Representative in a construction environment and an Associate's degree with an emphasis on construction safety or equivalent combination of education and experience Minimum OSHA 30 required, OSHA 510 preferred TWIC card preferred Candidate must have at least one current safety certification such as STSC, CHST, ASP, or CSP Travel will be required.  Must be willing to travel and work from project sites on a nationwide basis for extended periods of time. Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
To be considered for this position, please apply by clicking the link below. https://www.robinsonconstruction.com/join-our-team/ Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Concrete Carpenters! ESSENTIAL RESPONSIBILITIES: Reads blueprints, drawings and sketches to fully grasp requirements. Coordinates with job site Superintendent/Foreman to configure construction lay out. Installation of forms for placing concrete and grout. Assists with the proper installation of reinforcing, anchors and imbeds. Is familiar with all safe work practices for hand tools and power tools if trained. Knowledgeable of elevations and has ability to help shoot grades. Uses Levels: site, laser, transit etc. Accurately measures, cuts and installs materials. Assists with concrete placement on footings, walls, flatwork and grade work. Assists other craft workers as needed or assigned. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. OTHER RESPONSIBILITIES: May train or supervise others in job duties. May perform a variety of duties including those of other positions. Industrial machine licenses (such as a forklift license) preferred. Current OSHA 10 or MSHA Certification preferred. TWIC card preferred. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Successful completion of a carpentry apprenticeship program preferred. Three or more years proven construction carpentry experience required. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of carpentry techniques and methods of installation and construction. Knowledge of basic mathematics and its applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Skill in the standard use of tools and equipment of the profession. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. Ability to visualize a layout by looking at plans and prints. PHYSICAL REQUIREMENTS: Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt. OTHER IMPORTANT INFORMATION: Travel will be required.  Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring the following hand tools to each job site: Tool Belt, Hammer, Tape Measure (30-35"), Chalk Line, Carpenter’s Pencil, Utility Knife, Tin Snips, Nail Puller, Speed Square, Framing Square, Levels/Plumb Bob and Wood Chisel.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.
To be considered for this position, please apply by clicking the link below. https://www.robinsonconstruction.com/join-our-team/   Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing facilities throughout the United States. Our clients include heavy industrial, manufacturing; food grade processing plants, chemical and processing; power and renewable energy; healthcare facilities, and mining industries, as well as federal, state, and municipal agencies. We have an immediate need for Apprentices!  No experience necessary - this is the perfect opportunity to learn the construction trades! ESSENTIAL RESPONSIBILITIES: Assists all trades in construction activates by utilizing critical thinking skills to accomplish tasks at hand. Erects and dismantles scaffolding. Demolishes buildings and dismantle forms, along with setting up pumps and hoses. Removes projections from concrete using a variety of mechanized and hand tools and equipment. Signals operators of construction equipment (such as cranes and diggers) to facilitate alignment, movement and adjustment of machinery. Digs trenches using spades and other equipment by ensuring that they conform to length and width specifications. Levels earth to fine grade specifications and ensure that extra soil / earth is stored or piled in designated areas. Mixes, grades, and pours concrete in appropriate quantities into existing frameworks by following provided instructions. Clears work sites by removing debris and hazardous materials to make them ready for construction work. Installs and removes barricades to provide assistance in ensuring worksite safety. Takes personal responsibility for fostering a safe workplace by following safety policies and procedures. OTHER RESPONSIBILITIES: May perform a variety of duties including those of other positions. EDUCATION / EXPERIENCE:                                                                                        High school diploma or GED preferred. Previous experience in a construction environment preferred. Current OSHA or MSHA certification preferred. TWIC card preferred. KNOWLEDGE / SKILLS / ABILITIES: Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, or other industrial structures. Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Skill in the standard use of tools. Ability to work successfully as a team and independently with moderate supervision. Ability to understand and follow directions. Ability to communicate effectively in both oral and written form. PHYSICAL REQUIREMENTS: Performs strenuous physical labor under adverse field conditions. Must have excellent stamina. Coordinate eye-hand movements with control and precision. Use hands and fingers fully; reach for, manipulate and feel objects; stoop, kneel, crouch, and/or crawl. Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction). Lift and carry objects weighing up to 50 pounds. Stoop, lay, bend or squat for long periods of time. WORKING CONDITIONS: May be exposed to fumes, dust or other airborne particles. May be exposed to loud noises. Position regularly works near moving mechanical parts and vibrating machinery. May be exposed to extreme outside conditions that include inclement weather, heat and humidity or cold and wet conditions. May be exposed to hazardous chemicals or waste. OTHER: Travel will be required.  Must be willing to travel and work from project sites on a nationwide basis for long periods of time. Overtime will be required. Shiftwork may be required. Holiday and weekend work may be required. REQUIRED TOOLS: Must possess and bring the following hand tools to each job site: Locking pliers (vice grip) 10", adjustable wrench (crescent wrench) 12", 25' Tape Measure, Lineman Plires, Retractable Utility Knife, 20 oz Carpenter Hammer, Screwdrivers (1 phillips and 1 straight)  medium size, Leather Tool Belt, and Leather Work Gloves.   Robinson Construction is an Equal Opportunity/Affirmative Action employer.  We will provide equal opportunity to all applicants and prohibit any discrimination because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability or veteran status. Applicants are treated on the basis of their job-related qualifications, ability and performance.